Gaskets

EPDM

Gaskets

All discs are supplied with "factory-installed" integrated flange gaskets. The standard material is EPDM and can be used from -40 °C to +120 °C. As an alternative the following standard materials are available:

White FDA Silicone - 50 °C to +200 °C
Klinger - 100 °C to +400 °C
Ceramic -100°C to +900 °C
Other materials can be supplied on request


















Insulation

Accessories

Insulation

Insulation consists of a fire-proof mineral wool according to DIN 1259. The insulation is directly mounted to the "vent- side" of the explosion vent and is protected by a light-weight aluminium cover with a water-tight seal. It is secured to the disc to prevent it from flying away during venting. BRILEX insulation does not have any affect on the venting relief capability or efficiency. This has been proved by notified bodies in many dynamic explosion tests. Optional insulation thickness can be supplied to meet the customer's specifications.

Explosion Vent

IInsulation

Insulated BRILEX - KE.

Mounting Frames

Accessories

Mounting Frames

The necessary outlet flange for types GE / KE can also be supplied. The following material is available: Zinc plated carbon steel or stainless steel.

Burst Sensor - SE - ATEX

Sensor

Burst Sensor - SE - ATEX

To monitor an installation a burst sensor type SE can be installed. The sensor signals the opening of the bursting disc so that equipment such as fans or rotary valves can be switched off. SE sensors are installed separately also just above the explosion vent. This enables SE sensors to be easily adapted to existing installations.They are also suitable for the food industry.

Burst Sensor -SE - HT - ATEX

Sensor

Burst Sensor -SE - HT - ATEX

The SE sensor is complemented by the HT sensor, which is also suitable for use at high temperatures.

Burst Sensor SE - WIRE

BRILEX SE - WIRE)

Burst Sensor SE - WIRE

Another alternative is the Sensor SE - WIRE.
The cable loop is torn when the explosion vent is opened. It results in the electric circuit interruption and a continuous, highly resistant signal is generated. The signal communicates explosion and immediate installation cut off.

Guidelines and Certificates

The basis for our controlled quality is the quality management system according to DIN ISO9001:2008. All products are examined and certificated according to 94/9/EC (ATEX 100). The requirements by VDI 3673, EN 14491, NFPA68 have been met. All products are in agreement with CE and are labeled appropriately.





Approvals and Documentation

Each batch of explosion vents is tested in the factory according to EN 14797. Burst tests are witnessed by BRILEX Quality Control (QC) personnel or on request by independently accredited third parties such as TÜV or others. The discs are then tagged by BRILEX QC personnel. Works test certificates (burst test certificates) will generally be provided for all products according to EN 10204 3.1 B.